[RAPIMAN] RApid Prototyping and Innovative MAnufacturing Network

Search site:

Vnos povpraševanja

Subject
	For short description of your querry/problem, please use the field below.
Description
	Insert the file with your 3D model into the field file. If possible upload your file in STL format. Optionally (in a case of STL file size being to large) also: IGES and STEP.
File

	Use the next field for a thorough description of desired material for your part. Please enter as much data about any specific mechanical or other properties necessary.
Tensile strength	[MPa]
Elongation at break	[%]
Yield strenght	[J/m]
Tensile Modulus	[MPa]
Flexural strength	[MPa]
Flexural modulus	[MPa]
Heat Deflection Temp.	[°C]
Compression strenght	[MPa]
Hardness
Shore A/D
Average grain size	[mm]
Surface roughness/quality
	Input desired or similar kind of material.
Material
Acceptable date of delivery	in format dd.mm.YYYY

My inquiry

13.10.2009
Povpraševanje_1